fast and free delivery on all standard orders

BURCO BC02 HOT WATER BOILER FILTER MICROFILTER CARTRIDGE AUTOFILL 2019 RANGE & DESCALE

Categories: , ,

Product SKU: BB71 & BC02 BURCO FILTER

Part Info

  • 1. Isolate the boiler from electrical supply.
  • 2. Allow the water to cool to approximately 60°C (Heat insulated gloves are recommended)
  • 3. Lift the lid on the top of the boiler & twist the black tank cap clockwise and remove it. (Picture 1)
  • 4. Add descaling agent through opening (Picture 2) in accordance with manufacturer’s instructions.
  • 5. Replace the black tank cap (anti-clockwise) and ensure it is secure.
  • 6. Turn on the electricity and allow the boiler to operate normally for approximately 45 minutes.
  • 7. Isolate / turn off the boiler and allow to cool down.
  • 8. Remove the tank cap again to inspect the tank and level detectors for scale deposits.
  • 9. Drain and flush the de-scaling agent from the tank, using tap on the front of theappliance.
  • 10. STANDARD WIDTH MODELS ONLY To drain the tank completely, locate the drain valve at base (picture 4).
  • 11. SLIMLINE MODELS ONLY To drain tank completely, locate drain valve behind filter access panel.
  • 12. Attach appropriate drain pipe from accessories kit & open drain valve to drain water through flexible pipe (pictures 5,6).
  • 13. Connect a hose from the overflow pipe to suitable waste water disposal unit and open the valve to drain the tank.
  • 14. When empty, close the drain valve.
  • FILTER CHANGE:
  • Standard Width: With the boiler empty and lying on its back, locate the filter at base of the boiler.
  • Twist cartridge anticlockwise to remove (some residual water may be present).
  • Slimline Water Boiler: Push the filter access panel, the magnetic catch releases the door, pull to open.
  • Twist cartridge anticlockwise to remove (some residual water may be present)
  • Twist new cartridge clockwise until locked in position
  • Press & hold the UP & DOWN buttons for 3 seconds to reset filter alarm on controller.
  • 15. Replace tank cap, lift off lid & turn the boiler back on.
    • View Compatible Models

    £99.50 £82.92 ex vat

    34 in stock

    Part Info

  • 1. Isolate the boiler from electrical supply.
  • 2. Allow the water to cool to approximately 60°C (Heat insulated gloves are recommended)
  • 3. Lift the lid on the top of the boiler & twist the black tank cap clockwise and remove it. (Picture 1)
  • 4. Add descaling agent through opening (Picture 2) in accordance with manufacturer’s instructions.
  • 5. Replace the black tank cap (anti-clockwise) and ensure it is secure.
  • 6. Turn on the electricity and allow the boiler to operate normally for approximately 45 minutes.
  • 7. Isolate / turn off the boiler and allow to cool down.
  • 8. Remove the tank cap again to inspect the tank and level detectors for scale deposits.
  • 9. Drain and flush the de-scaling agent from the tank, using tap on the front of theappliance.
  • 10. STANDARD WIDTH MODELS ONLY To drain the tank completely, locate the drain valve at base (picture 4).
  • 11. SLIMLINE MODELS ONLY To drain tank completely, locate drain valve behind filter access panel.
  • 12. Attach appropriate drain pipe from accessories kit & open drain valve to drain water through flexible pipe (pictures 5,6).
  • 13. Connect a hose from the overflow pipe to suitable waste water disposal unit and open the valve to drain the tank.
  • 14. When empty, close the drain valve.
  • FILTER CHANGE:
  • Standard Width: With the boiler empty and lying on its back, locate the filter at base of the boiler.
  • Twist cartridge anticlockwise to remove (some residual water may be present).
  • Slimline Water Boiler: Push the filter access panel, the magnetic catch releases the door, pull to open.
  • Twist cartridge anticlockwise to remove (some residual water may be present)
  • Twist new cartridge clockwise until locked in position
  • Press & hold the UP & DOWN buttons for 3 seconds to reset filter alarm on controller.
  • 15. Replace tank cap, lift off lid & turn the boiler back on.

    • Linked Models

    Linked Part Number

    Related Products.

    View All Products

    SKU: 76316_PRE-RINSE HOSE

    REPLACEMENT PRE RINSE SPRAY GUN HOSE 37″ LONG FLEXIBLE METEL SPARES & PARTS

    SKU 76316_PRE-RINSE HOSE Categories ,

    £52.00 £43.33 ex vat

    Add to basket

    SKU: 76270_SWT6

    87mm FLANGE WASTE OUTLET FITTING FOR STAINLESS STEEL CATERING SINKS 42mm 1.1/2″

    SKU 76270_SWT6 Categories ,

    £21.00 £17.50 ex vat

    Add to basket

    SKU: 76001_DS107 X 2

    FLUSH BARSS RING REDUCER 1/4″ X 1/8″ FITTING REDUCING BUSH SET TEST NIPPLE POINT

    SKU 76001_DS107 X 2 Categories ,

    £4.99 £4.16 ex vat

    Add to basket

    SKU: 75930_SW70 X 10

    15MM BRASS OLIVE FOR GAS WATER PIPE PLUMBING SPARE PARTS X 10

    SKU 75930_SW70 X 10 Categories ,

    £4.90 £4.08 ex vat

    Add to basket

    SKU: 75854_RB62

    CATERING WASTE DRAIN HOLE FITTING S/STEEL SINK OUTLET 1. 1/2 BSP PLUG HOLE

    SKU 75854_RB62 Categories ,

    £19.99 £16.66 ex vat

    Add to basket

    SKU: 75791_RB62.

    WASTE FITTING FOR STAINLESS STEEL COMMERCIAL CATERING SINKS 40mm 1 1/2″ SPARES

    SKU 75791_RB62. Categories ,

    £19.99 £16.66 ex vat

    Add to basket
    Translate »